TEL

+86-536-6549353

PRODUCTS CENTER

Home / Products / Rotary Retort

Rotary Retort

  • Water spray rotary retort

    The water spray rotary sterilization retort uses the rotation of the rotating body to make the contents flow in the package. Heat up and cool down by the heat exchanger, so the steam and cooling water will not contaminate the product, and no water treatment chemicals are needed. The process water is sprayed onto the product through the water pump and the nozzles distributed in the retort to achieve the purpose of sterilization. Accurate temperature and pressure control can be suitable for a variety of packaged products.
    + Details + Inquiry
  • Steam rotary retort

    Steam and rotary retort is to use the rotation of the rotating body to make the contents flow in the package. It is inherent in the process that all air be evacuated from the retort by flooding the vessel with steam and allowing the air to escape through vent valves.There is no overpressure during the sterilization phases of this process, since air is not permitted to enter the vessel at any time during any sterilization step. However, there may be air-overpressure applied during the cooling steps to prevent container deformation.
    + Details + Inquiry
  • Water immersion rotary retort

    Water immersion rotary retort uses the rotation of the rotating body to make the contents flow in the package, meanwhile drive the process water to improve the uniformity of the temperature in the retort. Hot water is prepared in advance in the hot water tank to start the sterilization process at high temperature and achieve the fast temperature rising, after sterilization, hot water is recycled and pumped back to hot water tank to achieve the purpose of energy saving.
    + Details + Inquiry