TEL

+86-536-6549353

PRODUCTS CENTER

Home / Products / PRODUCTS CENTER

PRODUCTS CENTER

  • Water spray retort

    Heat up and cool down by the heat exchanger, so the steam and cooling water will not contaminate the product, and no water treatment chemicals are needed. The process water is sprayed onto the product through the water pump and the nozzles distributed in the retort to achieve the purpose of sterilization. Accurate temperature and pressure control can be suitable for a variety of packaged products.
    + Details + Inquiry
  • Water cascade retort

    Heat up and cool down by the heat exchanger, so the steam and cooling water will not contaminate the product, and no water treatment chemicals are needed. The process water is evenly cascaded from top to bottom through the large-flow water pump and the water separator plate on the top of the retort to achieve the purpose of sterilization. The precise temperature and pressure control can be suitable for a variety of packaged products. The simple and reliable characteristics make DTS sterilization retort widely used in the Chinese beverage industry.
    + Details + Inquiry
  • Side spray retort

    Heat up and cool down by the heat exchanger, so the steam and cooling water will not contaminate the product, and no water treatment chemicals are needed. The process water is sprayed onto the product through the water pump and the nozzles distributed at the four corners of each retort tray to achieve the purpose of sterilization. It guarantees the uniformity of the temperature during the heating and cooling stages, and is especially suitable for products packed in soft bags, especially suitable to the heat-sensitive products.
    + Details + Inquiry
  • Water Immersion Retort

    Water immersion retort uses the unique liquid flow switching technology to improve the uniformity of temperature inside the retort vessel. Hot water is prepared in advance in the hot water tank to start the sterilization process at high temperature and achieve the fast temperature rising, after sterilization, hot water is recycled and pumped back to hot water tank to achieve the purpose of energy saving.
    + Details + Inquiry
  • Direct Steam Retort

    The Saturated Steam Retort is the oldest method of in-container sterilization used by human. For tin can sterilization, it’s the simplest and most reliable type of retort. It is inherent in the process that all air be evacuated from the retort by flooding the vessel with steam and allowing the air to escape through vent valves.There is no overpressure during the sterilization phases of this process, since air is not permitted to enter the vessel at any time during any sterilization step. However, there may be air-overpressure applied during the cooling steps to prevent container deformation.
    + Details + Inquiry
  • Steam & Air Retort

    By adding a fan on the basis of steam sterilization, the heating medium and the packaged food are in direct contact and forced convection, and the presence of air in the sterilizer is allowed. The pressure can be controlled independently of the temperature. The sterilizer can set multiple stages according to different products of different packages.
    + Details + Inquiry
  • Pilot Retort

    The pilot retort is a multifunctional test sterilization retort, which can realize sterilization methods such as spray (water spray, cascade, side spray), water immersion, steam, rotation, etc. It can also have any combination of multiple sterilization methods to be suitable for food manufacturers' new product development laboratories, formulating sterilization processes for new products, measuring FO value, and simulating the sterilization environment in actual production.
    + Details + Inquiry
  • Water spray rotary retort

    The water spray rotary sterilization retort uses the rotation of the rotating body to make the contents flow in the package. Heat up and cool down by the heat exchanger, so the steam and cooling water will not contaminate the product, and no water treatment chemicals are needed. The process water is sprayed onto the product through the water pump and the nozzles distributed in the retort to achieve the purpose of sterilization. Accurate temperature and pressure control can be suitable for a variety of packaged products.
    + Details + Inquiry
  • Steam rotary retort

    Steam and rotary retort is to use the rotation of the rotating body to make the contents flow in the package. It is inherent in the process that all air be evacuated from the retort by flooding the vessel with steam and allowing the air to escape through vent valves.There is no overpressure during the sterilization phases of this process, since air is not permitted to enter the vessel at any time during any sterilization step. However, there may be air-overpressure applied during the cooling steps to prevent container deformation.
    + Details + Inquiry
  • Water immersion rotary retort

    Water immersion rotary retort uses the rotation of the rotating body to make the contents flow in the package, meanwhile drive the process water to improve the uniformity of the temperature in the retort. Hot water is prepared in advance in the hot water tank to start the sterilization process at high temperature and achieve the fast temperature rising, after sterilization, hot water is recycled and pumped back to hot water tank to achieve the purpose of energy saving.
    + Details + Inquiry
  • Vertical Crateless Retort System

    Continuous crateless retorts sterilization line has overcome various technological bottlenecks in the sterilization industry, and promote this process on the market. The system has high technical starting point, advanced technology, good sterilization effect, and simple structure of the can orientation system after sterilization. It can meet the requirement of continuous processing and mass production.
    + Details + Inquiry
  • Automated Batch Retort System(ABRS)

    Retort room automation system known as‘Automated Batch Retort System’ (ABRS) refers to the fully automated integration of all hardware designed for transportation of baskets from loader station to sterilization retorts and from there on to an unload station and packaging area. The global handling system can be monitored by a basket/pallet tracking system.
    + Details + Inquiry
  • Continuous hydrostatic sterilizer system

    Hydrostatic sterilization system is characterized by continuous operation, unmanned operation, safety and efficiency, energy saving and environmental protection, etc. It has been applied in Europe, America and other large food and beverage manufacturers.
    + Details + Inquiry
  • Options

    Retort monitor interface,Retort monitoring host ,F0 value system,Remote service support
    + Details + Inquiry
  • Dedicated basket for water spray retort

    Suitable for water spray retort, mainly used for bottles, cans packages.
    + Details + Inquiry
  • Dedicated basket for water cascade retort

    Suitable for water cascade retort, mainly used for bottles, cans packages.
    + Details + Inquiry
  • Dedicated basket for Rotary retort

    Suitable for rotary retort, mainly used for bottles, cans packages.
    + Details + Inquiry
  • Double layer tray

    The double-layer tray is a kind of food tray with high efficiency, energy saving and good heat distribution developed by dts based on accurate data calculation and a large amount of experimental data. the features are as follow:
    + Details + Inquiry
  • Food trays

    Tray is designed according to packages dimensions, mainly used for pouch, tray, bowl and casings packaging.
    + Details + Inquiry
  • Trays

    Tray bottom base plays a role in carrying between trays and trolley, and will be loaded into retort together with trays stack when loading retort.Tray is designed according to packages dimensions, mainly used for pouch, tray, bowl and casings packaging.
    + Details + Inquiry
  • Trolley

    Trolley is used to turn over the loaded trays on the ground, based on retort and tray size, trolley size shall match up with them.
    + Details + Inquiry
  • Hybrid layer pad

    The hybrid layer pad is specifically designed to securely hold irregularly shaped bottles or containers during rotating. it is consisted of silica and aluminum-magnesium alloy, which produced by a special molding process. the heat resistance of the hybrid layer pad is 150 deg. it can also eliminate the uneven press caused by the unevenness of the container seal, and it will greatly improve the scratch problem caused by the rotation for two-piece cans. the edge of the hybrid layer pad can be equipped with the suction picking points which can realize the automatically loading unloading by the loader&unloader.
    + Details + Inquiry
  • Layer divider

    Layer divider plays the role of spacing when products are loaded into basket, effectively prevent the product from friction and damage at the connection of each layer in the process of stacking and sterilization process.
    + Details + Inquiry
  • Retort Energy Recovery

    Energy recovery is the integrated recovery and utilization of steam energy, thermal energy and water resources that cannot be recycled and will be discharged which is developed by DTS according to the working process of retort so as to help customers reduce production cost.
    + Details + Inquiry
  • Manual loader unloader

    Manual loader unloader
    + Details + Inquiry
  • Semi-automatic loader unloader

    Semi-automatic loader unloader
    + Details + Inquiry
  • Full automatic loader unloader

    Full automatic loader unloader
    + Details + Inquiry